Toilet shopping tips, how to pass the blockage?
Release time:
2023-02-15
Toilet purchase skills
Toilet purchase tips one:
Look at the weight, the heavier the toilet the better, the weight of the ordinary toilet in about 50 pounds, a good toilet in about 100. Weight toilet density, the better the quality. Simple test method, pick up the tank cover, weighing its weight.
Toilet purchase tips two:
Water outlet. The best toilet drainage hole is one, the more drainage holes affect the flushing power.
Toilet purchase tips three:
Glaze. Good quality toilet glaze should be smooth and smooth without blistering, color saturation. Can let you easily flush the toilet clean, why the expensive toilet three to five thousand, cheap three to five hundred, the most direct gap is the glaze, choose the toilet should go to touch the toilet drain, if rough, later easy to cause the remains of hanging.
Toilet purchase skills four:
Caliber. Large diameter drainage pipe and the inner surface glazed, not easy to hang dirty, drainage quickly and powerful, effective in preventing clogging. Test method, the entire hand into the toilet mouth, generally can have a palm capacity for the best.
Flush toilet blocked how to pass
Method 1, first prepare an air cylinder wrapped in rags and then pour some water into it and start pumping for a while and it will be OK.
Method 2: Use a hose to try to plug into the pit and pass it downward to stir up the blockage. This method is suitable for easy to stir the blockage.
Method 3, if it is easy to decompose objects such as paper clogs, you can pour boiling water first, soften the blocked objects in the sewer pipe, but do not be too anxious, to soak for a while, and so the blockage softened and soaked, see the sewage slowly drain away, and then a large bucket of water may pass.
Flush toilet leaking solution
The common reason of flush toilet leakage is that the hemispherical rubber cover of the drainage opening is lighter, and the water tank is not tight enough to leak after the drainage due to the gravity, and it is often necessary to cover the water tightly many times. The solution is to tie a few heavy things on the connecting rod of the rubber cover, such as large nuts, toothpaste skin, etc. Note that the bundle should be as close as possible to the rubber cover, so that the rubber cover will be easier to cover the drain, and the leakage problem will be solved.
Related news